Toastmaster TFP8W - Manual (Page 6)

Before Using For The First Time
1. Remove all packaging material before using.
2. Wash Lid, Chopping Blade, Processing Bowl,
Food Chute, Shield, Food Pusher and Discs, in warm soapy water.
Rinse and dry thoroughly, see CARE AND CLEANING.
CAUTION: BLADES ARE SHARP, HANDLE WITH CARE.
CAUTION: DO NOT IMMERSE FOOD PROCESSOR BODY
IN WATER OR OTHER LIQUIDS.
Operating Instructions
How to Slice or Shred Food:
1. Attach the 8-Cup Processor Bowl to the
Food Processor Body by placing on Drive
Shaft. Turn 8-Cup Processor Bowl counter-
clockwise until it clicks into place. (See
Picture A)
NOTE: For Slicing or Shredding Food the
Chopping Blade is not needed.
2. Place the Discharge Disc onto the Drive Shaft. (See Picture B)
3. Place the Slicing/Shredding Disc on the Drive Shaft.(See Above
Picture B)
NOTE: Both sides of the Slicing/Shredding Disc indicate
which Function it will perform. 1. Food Processor Body
2. 8-Speed Control Dial
3. Pulse Button
4. Lid with Food Chute
P/N 71033
5. Food Pusher P/N 71034
6. Drive Shaft
7. Shield P/N 71035
8. Continuous Flow
Side Chute
9. 8-Cup Processor Bowl
P/N 71036
10. Interlock Mechanism
11. Lock Tabs
12. Latch
13. Cord
14. Discharge Disc P/N 71037
15. Chopping Blade P/N 71038
16. Slicing/Shredding Disc
P/N 71039
Plasticizer Warning
CAUTION: To prevent Plasticizers from migrating from the finish of
the countertop, tabletop or other furniture, place NON-PLASTIC
coaster or placemats between the appliance and the finish of the
countertop, tabletop or other furniture.
Failure to do so may cause the finish to darken, permanent blemishes
may occur or stains can appear.
Getting to Know Your
8-Cup Food Processor
1.
2.
3.
4.
5.
6.
7. 8.
9.
10.
11.
12.
13.
14. 15.
16.
Picture A
Picture B