Toshiba SATELLITE M30X - Manual (Page 59)

59 Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
You need a standard Phillips no. 1 screwdriver to install a
memory module.
To avoid damaging the computer’s screws, use a standard
Phillips no. 1 screwdriver that is in good condition.
The computer has two memory module slots—Slot A and
Slot B. You can install one or two memory modules.
If you are adding memory after you have started to use the
computer, begin at step
1 , otherwise skip to step 2 .
1 Turn off the computer via the Start menu.
See “Using the Turn off computer or Shut down command”
on page 100 .
The operating system turns off the computer.
2 Unplug and remove any cables connected to the
computer.
3 Close the display panel and turn the computer upside
down to locate the expansion memory module slot cover.
Sample base of a Satellite M30X/M35X series computer
Expansion memory
module slot cover