TDK Maxeta iFA Series User Manual

TDK Hardware

Advertising
background image

Data Sheet: Maxeta

TM

iFA Series

©2002-2006 TDK Innoveta Inc.
iFA 28V 600W Advance Datasheet 8/3/2006

(877) 498-0099

1/19

MAXETA iFA SERIES DC-DC POWER MODULES

48V Input, 28V Output, 600W Full Brick






The Maxeta

 series power modules are ideally

suited for wireless applications to power
various RF power amplifiers. With a typical
90.5% full load efficiency, a power density
greater than 110W per cubic inch and a total
power and current output capability of 600W
and 21.4A respectively, the Maxeta

 Series

offers the highest efficiency, power density and
usable output power in a standard full brick
package currently available. A wide output
voltage trim range, -40% to +10%, remote
sensing, power good indication, isolated
remote on/off control and single wire active
current sharing are standard features
enhancing versatility. The Maxeta

 series

power modules are also suited for other
telecommunication applications.

Standard Features:


• Industry Standard 600W full brick

• Power

density:

> 110W/cubic inch

• High efficiency: up to 92%

• Typical efficiency: 90.5% at nominal input and

100% load

• Up to 600W of output power in high ambient

temperature with air flow

• Meets basic insulation requirements

• Single wire forced current sharing

• Start-up into pre-biased output bus

• User selectable on/off (either positive or

negative logic)

• Wide output voltage adjustment range

• Auto-recovery

protections:

o

Input under and over voltage

o

Current

limit

o

Short

circuit

o

Thermal

limit

• Latched output over-voltage protection

• Power

good

Indication

• Auxiliary

logic

output

• High reliability open frame, surface mount

construction

• Base-plate for improved thermal management

• Constant switching frequency

• Optional 0.110” pin length

• UL 60950 (US and Canada), VDE 0805, CB

scheme (IEC950)

• CE Mark (EN60950)

• EMI: CISPR 22 Class A/B with external filters

• Multiple

patents

pending

• ISO Certified manufacturing facilities



Optional Features:

• Short Thru-hole pin 2.794mm (0.110”)

• Output over-voltage signal replaces power

good

Advertising