Tech 21 SansAmp Acoustic DI - Manual

POWER REQUIREMENTS
* Operable with phantom power supply, minimum 24V DC, however, 48V DC,
is recommended.
* Utilizes standard 9V alkaline battery (not included). NOTE:The Input jack
activates battery.To conserve energy, unplug when not in use.
Power Consumption: approx. 7mA.
*USE DC POWER SUPPLY ONLY! Failure to do so may damage the
unit and void warranty. DC Power Supply Specifications:
-9V DC regulated or unregulated, 100mA minimum;
-2.1mm female plug, center negative (-).
Optional factory power supply is available:Tech 21 Model # DC2.
WARNINGS:
* Attempting to repair unit is not recommended and may void warranty.
* Missing or altered serial numbers automatically void warranty. For your own
protection: be sure serial number labels on the unit’s back plate and exterior
box are intact, and return your warranty registration card.
ONE YEAR LIMITED WARRANTY. PROOF OF PURCHASE
REQUIRED. Manufacturer warrants unit to be free from defects in materials
and workmanship for one (1) year from date of purchase.This warranty does
not include damage resulting from accident, misuse, abuse, alteration, or incor-
rect current or voltage. If unit becomes defective within warranty period,Tech
21 will elect to repair or replace it free of charge. After warranty expires,Tech
21 will repair defective unit for a fee.
ALL REPAIRS for residents of U.S. and Canada: Call Tech 21 for Return
Authorization Number. Manufacturer will not accept packages without
prior authorization, pre-paid freight (UPS preferred) and proper insurance.
FOR PERSONAL ASSISTANCE & SERVICE:
Contact Tech 21, Inc., any weekday from 10:00 AM to 6:00 PM, EST.
MADE IN THE U.S.A.
T E C H 2 1 . N Y C
333 West 52nd Street, NY, New York 10019
212-315-1116 / Fax: 212-315-0825 / www.tech21nyc.com
LEVEL
BLEND
TREBLE
BASS
MID
INPUT
OUTPUT
XLR
OUTPUT
ACTIVE
TM
ACTIVE
-
20dB PAD
PHANTOM
& GROUND
CONNECT
INPUT
TO XLR
MID SHIFT
750Hz
200Hz
3KHz
1
7
0
H
z