Technicolor - Thomson SUPERXPANDER LDK 4482 - Manual (Page 4)

1-2 User's Guide LDK 4482 - SuperXpander 02.38.3
Location of Controls and Functions
3
0
6
0
1(CLR)
0
4
0
2
0
5
0
FILTER
0
B
0
0
R
0
Select
0
G
0
VIEWFINDER
VF
Boost
0
Pip
0
Auto
white
0
MSC. SIGN
Camera on
Remote
Heater
On air
Y/ext
0
Ext 1
0
Centre
cross
0
Lamp
off
0
Safe
zone
0
Focus
ind
0
Ext 2
0
Dimm
0
Call
0
10 9 8 7 6 5 4 3 2 1
1 Optical filter selection
Select the optical filter by touching the appropriate
numbered switch. Switch 1 : Clear filter
Switch 2 : ND 0.6 filter
Switch 3 : ND 1.2 filter
Switch 4 : ND 1.8 filter
Switch 5 : 4 Point Star filter
Switch 6 : 6 Point Star filter
The LED in the switch flashes during a change and
then lights continuously to indicate the selected filter.
(The operation of this switch depends on the user
level that has been set for the camera.)
2 Automatic white balance switch
Pressing this switch starts the automatic white balance
process. This switch is in parallel with the AWB
switch at the front/left of the camera and operates in
the same way.
The LED in the switch flashes during the auto-white
process. (The operation of this switch depends on the
user level that has been set for the camera.)
3 VTR switch
When pressed it starts or stops the VTR when the
camera is in the local control mode.
4 LED indicators
CAMERA ON : lights when the camera is receiving
power.
REMOTE : lights when the camera is in the
remote control mode.
HEATER : lights when the lens heater is on.
ON AIR : the red LED lights when the camera
is on air.
: the yellow LED lights when the ISO
signal is activated.
5 Viewfinder R, G and B switches
Switches the R, G or B signal from the camera for
display in the viewfinder. When an R, G or B switch is
deselected, the Y or Y + c signal is displayed.
The selection of the Y or Y+c (contours added) signal
is carried out in the Vf/Lens \ Vf Inst \ Vf mon menu
on camera.
6 Viewfinder indicators switch
Switches the centre cross, safe area and focus
indicators in the viewfinder on and off.
Rear Panel