Toshiba B-443 User Manual
Page 29
EO1-33013
22
4.1.3 Printer Initialization
Printer initialization clears all downloaded files resident in flash memory, and
sets printer parameters to default values.
Parameter
Default Value
Cleared by Initialization
MILEAGE
N/A
No
FLASH TIMES
N/A
No
CHECK SUM
N/A
No
SERIAL PORT
96,N,8,1
Yes
CODE PAGE
437 (8 bit), USA (7 bit)
Yes
COUNTRY CODE
001
Yes
SPEED
2.0” /sec
Yes
DENSITY
09
Yes
SIZE
N/A
Yes
GAP(BLINE)
N/A
Yes
TRANSPARANCY
05,05,05
Yes
Please follow the steps below to initialize the printer:
1. Turn off the printer power.
2. Hold down the PAUSE and FEED buttons and turn on the printer power.
3. Do not release the buttons until the three LEDs flash in turn.
Note: Printing method (thermal transfer or thermal direct printing ) will be
set automatically at the activation of printer power.