Yamaha DVD-S540 - Manual (Page 13)

9
➜ Mono Right: Output the right audio channels
of the disc through the left and right audio jacks.
➜ MIX-Mono: each of the audio jacks can output
the same audio effect as stereo.
Repeat and Shuffle
● Each time you press REPEAT, the Repeat/Shuffle
mode changes as follows;
* This feature may not be available with some
discs.
With PBC OFF,
● Each time you press REPEAT, the Repeat/Shuffle
mode changes as follows;
Repeat A-B
DVD-Video Discs: repeat a sequence in a title
Video and Audio CDs: repeat a sequence in a
track
1 Press Repeat A-B at your chosen starting point.
2 Press Repeat A-B again at your chosen end point.
➜ The repeat sequence begins.
3 To exit the sequence, press Repeat A-B.
Disc Resume
This player can resume playback of the last 5 discs,
even if the disc was ejected or the power
switched off.
1 Load one disc, which is one of the last 5 discs.
2 Press PLAY when DVD player is recognizing the
disc. If the information of this disc has been stored
in the memory of DVD player, it will be played
back from the stop point last time.
OSD (On-Screen Display)
This function will provide some information about
your playing disc on the screen.
● Press ON SCREEN.
The Status window appears on the TV.
Title/Chapter/Track selection
1 Press 34 to select “Title” or “Chapter” (DVD) or
“Track” (VCD).
2 Press ENTER/OK.
3 Select a title, chapter or track number using the
numeric buttons.
Time Search
1 Press 34 to select “TT Time” or “CH
Time”(DVD) or “Track Time” or “Disc
Time”(VCD).
➜ “TT Time” refers to the total time of the
current title, and the “CH Time” refers to the
total time of the current chapter.
2 Press ENTER/OK.
3 Enter hours, minutes and seconds from left to
right using the numeric buttons. (e.g. 0:34:27)
Audio/Subtitle/Angle
You can change “Audio”, “Subtitle” or “Angle” if
available on the disc you are playing.
1 Press 34 to select “Audio”, “Subtitle” or “Angle”.
2 Press ENTER/OK.
3 For Audio and Subtitle,
Press 34 to highlight your selection and press
ENTER/OK.
or
For Angle,
Select an angle using the numeric buttons.
Repeat/Time Display
1 Press 34 to select “Repeat” or “Time Disp.”.
2 Press ENTER/OK.
3 Press 34 to highlight your selection and press
ENTER/OK.
Time display
Each time you press ON SCREEN, the time
display changes as follows;
DVD DVD
Chapter Repeat* Title Repeat
Shuffle Shuffle Repeat Repeat/Shuffle Off
VCD VCD CD CD
Track Repeat Disc Repeat
Shuffle Shuffle Repeat Repeat/Shuffle Off
DVD DVD VCD VCD CD CD
DVD DVD VCD VCD CD CD SVCD SVCD
DVD DVD VCD VCD
DVD DVD VCD VCD
DVD DVD
DVD DVD VCD VCD
CD CD
Total Elapsed Total Remain
Single Elapsed Single Remain
Operation