TMC EPIC ET4300 - Manual (Page 37)

Operating Your System
27
To put an outside call on hold:
1 Press HOLD.
2 To take the call off hold, press the
line button of the line on hold.
Note: Once a call is on hold,
it can be taken off hold by
any EPIC telephone.
While a caller is on hold, you can replace the
handset without disconnecting the call. Press
the LINE button at any time to return to your call.
Note: You cannot put an intercom call on hold.
If the call is still on hold at your telephone after
one minute, a triple ring will sound, and will
sound every minute thereafter to alert you that
the caller is still on hold.
Note: If you wish, you may change the first held
call reminder from two minutes to a different
time. (See Page 69.)
You can also take a call off from hold at a non-
EPIC telephone, by simply seizing the line at that
telephone.
Using Hold
PAGE
REDIAL
HOLD
Press HOLD to place an outside
call on hold
ET4300 UG for booklet old buttons v5 for PDF 021105.qxd 2/11/2005 2:56 PM Page 37