Toshiba 6F3A4508 - Manual (Page 10)

TOSHIBA 6F3A4508
- 9 -
1) Title
Figure 4.2 Title
The Title shows the W i Tool program version etc.
Click the x at the right end to quit W i Tool.
2) Menu bar
Figure 4.2 Menu bar
The Menu bar is used to select the function to be performed with W i Tool. The following
command buttons are also available for frequently used functions.
3) Command buttons
Figure 4.4 Command buttons
Command buttons are used to select the function to be performed with W i Tool.
4) Main
Main shows the function selected from the Menu bar or with a Command button.
5) Status bar
Figure 4.5 Status bar
The Status bar shows the status of the connected driver unit.
The following items appear from left to right
(1) Panel name of the connected drive equipment
(2) Drive Type name of the connected drive equipment
(3) Whether the status motor of the connected drive equipment is running/stopped
Click to see the preparation view.
(4) Fault status fault/alarm
(5) Test mode, simulation mode
(6) Allowed access level
(7) PC keyboard status
(8) PC date
(9) PC time
(10) Online (communicating with drive unit)
Click when online to change to offline.
Click when offline to change to online.