Tektronix PHASER 380 - Manual (Page 44)

2 Getting Set Up
2-26 Phaser 380 Color Printer
Unlocking the transit restraint
Caution To avoid damaging the printer, always turn the printer power
on and off using the rear panel On/Off switch. Turn the
printer power on before unlocking the transit restraint.
1. Turn the printer power on using the rear-panel On/Off switch.
2. The transit restraint lock is located on the right side of the printer.
Insert a wide ßat-blade screwdriver or large coin into the lock slot.
3. While pushing inward with slight pressure, turn the lock button
counterclockwise until it springs out ßush with the side of the
printer.
Caution If you move or ship the printer, be sure to lock the transit
restraint to protect the printhead from damage. Refer to
ÒMoving your printerÓ on page 5-53 for more information.
9662-06
2
3