Toshiba B-880-QQ SERIES User Manual
Page 20
Advertising
8-5
EO1-33017
8. LOADING THE MEDIA
Strip type:
1
Strip labels from the backing paper for about 200-mm long from the top edge of the label roll.
2
Lower the backing paper release bar.
3
Pass the backing paper between the strip roller and the backing paper holder. After taking up
any slack of the media, set the backing paper release bar in position.
Fig. 8-8
Media (Backing Paper)
Backing Paper Holder
Backing Paper Release Bar
9.
Turn the head lever to the proper position depending on the used media. (Refer to Fig. 7-1)
1
: Labels or thin tag paper
2
: Thick tag paper
CAUTION:
When using labels ensure that the head lever is set to position
1
.
10. Close the top and right side covers.
8. LOADING THE MEDIA
Advertising