TOA Electronics CPEI 25150 - Manual (Page 10)

Section 2: Installation and Setup 7
There are six main menus in the GUI:
The following buttons appear at the bottom of each configuration page:
Menu Tab Description
Personalize Use this menu to set up your password,
device time and device name. You can also
abandon your personal settings by clicking
Restore Factory Settings .
Internet Use this menu to configure internet
connection settings, including
Authentication, Protocol, Firewall, and
Dynamic DNS.
Status Use this menu to display network status,
including WiMAX, Internet, LAN, and Device
Information.
Port Forwarding Use this menu to enable Universal Plug and
Play (UPnP) Internet Gateway Device (IGD)
profile to allow certain Windows
applications to setup the port forwarding
rule dynamically when NAT is enabled on
this device.
Local Address Use this menu to display the IP Address and
netmask address in the local network.
Control Panel Use this menu to manage the device
software.
Button Function
Apply Saves your changes. If you restart your
modem without saving your changes, all
changes are lost. After the device restarts,
the last saved configuration is used.
Undo Clears your changes on the current page
and returns to the main menu. Once you
click
Apply , the Undo button will NOT clear
your changes.
Next Confirms the current setting and moves on
to the next screen.
Refresh Manually updates current status page.
Auto Refresh Updates automatically without needing you
to refresh manually.
Wizard Starts Setup Wizard manually if your
modem did not run the setup program
automatically.
Note: Illustrations in this manual containing an image of what you see on your computer screen are for reference
purposes only. Values shown in the illustrations in this manual may be different from what you see on your computer
screen.