Topcom 575s - Manual (Page 11)

Butler 575
11
• Press the Erase button, “M_CLEAR” appears
on the display.
• Enter the memory location, for ex. 9.
• The memory location is empty again.
• The unit returns to idle mode.
4.13.3 Calling a memory number
• Press the Memory button.
“MEM” appears on the display .
• Enter the memory location, for ex. 9.
The programmed number appears on the display.
• Press the Hookswitch button. The number on the
display will be dialled.
You can also call a memory number as follows :
• Press the Hookswitch button.
• Press the Memory button.
• Enter the number of the memory location, for ex. 9.
• The number is shown on the display and is dialled.
5 FUNCTIONS
5.1 The Base station
Handsets can be subscribed to 4 different base stations. When a handset is
subscribed to several base stations, you can choose which base station you want to
work with.
Note : When you select “BASE NO : AUTO”, the base unit is searched automatically. If there are
more than two base units, the handset selects an arbitrary base station. This is only possible when
the handset is subscribed to several base units.
M_CLEAR
EMPTY
MULTI 1
MEM
091120010
091120010