Toshiba Color Television/ Video cassette recorder MV13K3CR - Manual (Page 9)

DISASSEMBLY INSTRUCTIONS
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
1.
2.
3.
4.
1-3: TV/VCR BLOCK (Refer to Fig. 1-3)
Fig. 1-3
Remove the 4 screws 1 .
Remove the screw 2 .
Remove the AC cord from the AC cord hook 3 .
Remove the Back Cabinet in the direction of arrow.
Fig. 1-1
Front Cabinet
Back Cabinet
1
1
1
3
2
1
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1.
2.
3.
Front Cabinet CRT PCB
Fig. 1-2
1.
2.
3.
4.
Remove the 2 screws 1 .
Disconnect the following connectors:
(CP352, CP353, CP354, CP401 and CP502).
Unlock the support
2 .
Remove the TV/VCR Block in the direction of arrow.
Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
Disconnect the following connectors:
(CP801 and CP851).
Remove the CRT PCB in the direction of arrow.
1
1
2
UP TO
RELEASE
TV/VCR Block
1-4: DECK CHASSIS AND SYSCON PCB
(Refer to Fig. 1-4)
1.
2.
3.
4.
5.
6.
Remove the 3 screws 1 .
Remove the 3 screws 2 .
Disconnect the following connectors:
(CP1004, CP1005, CP1006, CP4001, CP4002 and
CP4003).
Remove the Deck Chassis and Deck Shield Plate in the
direction of arrow (A).
Remove the screw
3 .
Remove the Syscon PCB in the direction of arrow (B).
1
1
1
2
2
2
3
Deck Chassis
Deck Shield Plate
(A)
Syscon PCB
Deck Holder
Fig. 1-4
(B)
Front Cabinet