Toshiba PDR-M71 - Manual (Page 107)

- 105 -
Getting Ready
Taking
Photographs
Playing
Back Images
Other
Applications
Additional
Information
Erasing Images
Handy
Functions
Memo
• When the SmartMedia™ already contains a DPOF information file, the message “RECREATE DPOF
FILE?” is sometimes displayed. Note that if you select [YES], the file is overwritten, and the
information of the existing DPOF information file is erased. The same also applies when the DPOF
information file is overwritten on a personal computer and values not supported by this camera were
set.
• Images set in the DPOF format are automatically protected. Write-protection cannot be removed by
regular methods (
➲
Page 108)
• You can specify up to 99 prints or up to 999 frames in a single SmartMedia™. The maximum number
of prints you can specify in a single SmartMedia™ is limited to 10000.
Print Information (continued)
Select the desired operation.
[CONFIRM]: Press this to confirm the settings.
1 Press or to select [CONFIRM], and press ENTER.
2
After confirming the settings, press ENTER.
3 Select [END] and press ENTER.
[CLEAR ALL]: Press this button to clear all settings.
1 Press or to select [CLEAR ALL], and press ENTER.
2
To clear all settings, select [EXECUTE] and press ENTER.
To cancel [CLEAR ALL], select [CANCEL] and press ENTER.
3
To remove the write-protection, select [YES] and press ENTER.
4 Select [END] and press ENTER.