Technicolor - Thomson TM9049 - Manual (Page 10)

EN
CD Player
Play and Pause
1. In stop mode, press PLAY/PAUSE to
begin CD playback.
The icon is displayed.
2. During CD playback, press PLAY/PAUSE to
pause playback. Press again to resume.
The icon flashes in pause mode.
Skip and Search
1. Press or to skip to the previous or
next track respectively.
2. Press and hold or to search quickly
current track backward or forward
respectively.
Stop Playback
Press STOP to stop playback.
Random Playback
In stop mode, press to activate random
function and begin random playback.
The icon appears on display when random
playback is activated.
Press STOP to de-select random playback
mode.
Programming
1. In stop mode, press PROG. to enter program
mode. The program location will flash once on
the display. Then the track number stored in
the memory location will keep flashing.
If the memory location is empty, 00 will be
flashing.
2. Press or to select the track you
want to program.
3. Press PROG. again to confirm your selection
and access the next program location.
4. Repeat steps 2 to 3 to program to a maximum
of 20 tracks.
5. Press PLAY/PAUSE in program mode to
start program playback (PROGRAM indicator
remains lit on the display).
Press STOP to return to normal playback
mode.
Clearing program list
Your program will be erased once you open the disc
compartment door or change to another source
mode (e.g. radio).
Tips: Tips: Tips: Tips: Tips:
If you are in normal playback mode but want
to play the saved program. Press PROG.
PROG. PROG. PROG. PROG. and
then PLAY PLAY PLAY PLAY PLAY.
7
Note: Note: Note: Note: Note:
Random playback can not be selected in
program mode.
TM9049 EN 1/7/05, 10:19 AM 11