Top Innovations MC1227 - Manual (Page 10)

10 Top Innovations, Inc.
A
SSEMBLY
I
NSTRUCTIONS
ATTACHING FLEXIBLE STEAM
HOSE
1. Identify Male end of the Flexible Steam
Hose (FIGURE 9-A). It will have a large
cylinder with two tabs on either side.
2. Identify Female end of the Flexible Steam
Hose (FIGURE 9-B). It will have a small
knob protruding from a cylindrical hole.
FIGURE 9
3. Insert cylinder on Male end (FIGURE 10) into hole on face of main unit (FIGURE 11).
Insert it so that two tabs on sides of cylinder (FIGURE 10-A) fit into two tab holes on
sides of main hole (FIGURE 11-B). Twist cylinder 90 degrees counter-clockwise, so
small line on end of cylinder aligns with top of main unit.
FIGURE 10 FIGURE 11
4. Attach Steam Jet Nozzle (FIGURE 12) to Female end of Flexible Steam Hose
(FIGURE 13). Insert cylinder on back of Steam Jet Nozzle into hole in Female end
of Flexible Steam Hose. Insert it so that two tabs on sides of cylinder
(FIGURE 12-A) fit into two tab holes on sides of main hole (FIGURE 13-B).
FIGURE 12 FIGURE 13
5. Rotate Steam Jet Nozzle in direction indicated by the “Lock” arrow at rear of nozzle
(counter-clockwise). Twist 90 degrees, until properly and securely seated.