Topcom WBR 754SG - Manual (Page 9)

Topcom Skyr@cer WBR 754 9
ENGLISH
• Now you can change the LAN settings:
- The LAN IP address and Subnet mask can be changed.
- The router DHCP server can be Disabled / Enabled
- The DHCP range can be set.
- Click Next to proceed
• Now the WBR754 will try to detect your broadband connection type
•
Depending on your connection type next screen will appear: (for PPPoE, this screen will not appear if the auto
detection has been successful )
- Select your Connection Type
- Click Next to proceed
-
Obtain IP automatilally (DHCP client): this connection is mostly used for connecting the WBR754 to a cable
modem.
- Fixed IP address: for connections with fixed WAN IP address.
- enter the WAN IP, Subnet Mask, Gateway and DNS addresses.
- Click Next to proceed.