Emergency heat, Auxiliary heat, Then set the fan switch – Trane taystat 570 User Manual

Page 4

Advertising
background image

4

Pub. No. 22-5186-01

69-1248

Then set the FAN switch:

Auto:

Normal setting for most homes.
Some systems may delay the fan
turning on and off with the equip-
ment.

On:

The fan runs continuously. Use for
improved air circulation and air
quality.

Emergency Heat

The Emergency Heat feature allows you to
“turn on” the electric heat section of the
system by moving the system switch to the
Em. Ht. position. The indicator flashes and

FAN

Auto On

FAN
SWITCH

M10273

points to Em Ht when the system is in
emergency heat mode. The

indicator may

also point to Aux Ht if the system calls for
additional back-up heating.

Set

Room

M10287

INDICATOR

Em Ht
Aux Ht

Auxiliary Heat

The auxiliary heaters assist the heat pump
under normal conditions when low outdoor
temperature occurs. The

indicator points to

Aux Ht when the auxiliary heating equipment
operates.

Advertising