TRENDnet 1000 Base-SX/LX - Manual (Page 4)

2. Hardware Installation
English
2
Installing two stand alone Fiber Converters
1. Connect the fiber cable to the fiber
converters. This cable must be
multi-mode for the TFC-1000MSC.
This cable must be single-mode for
the TFC-1000S20/S50/S70/S10D3/
S10D5.
2. Connect an RJ-45 Ethernet cable
from the Ethernet port on the fiber
converters to an Ethernet port on
your switch (e.g TEG-S160TX or
TEG-S240TX).
Note: The TX and RX cables must be reverse on the opposite fiber connection.
Note: The TFC-1000S10D3 must be paired with the TFC-1000S10D5.
3. Connect the power adapter to the
back of the fiber converter.