Taylor 161 - Manual (Page 9)

5 Model 161 Operator Parts Identification
Beater Door Assembly
ITEM DESCRIPTION PART NO.
1 DRAW VALVE 024763
2 O--RING 7/8 OD X .103 W 014402
3 SEAL--VALVE 030930
4 DOOR A.--3 SPOUT X30753--SER
5 PIVOT PIN A.--SHORT X38539
6 O--RING 5/16 OD X .070 W 016272
7 DRAW VALVE HANDLE 030564
8 HAND SCREW (STUD NUT) 034829
ITEM DESCRIPTION PART NO.
9 DESIGN CAP 014218
10 PIVOT PIN A.--LONG X38538
11 GUIDE BEARING 014496
12 CENTER DRAW VALVE 031164
13 O--RING 2--3/4 OD X .139 W 019998
14 FRONT BEARING 023262
15 BEATER ASSEMBLY X24689
16 O--RING--13/16 OD X .139 W 021278