TP-Link TD-W8910G - Manual (Page 4)

1.1 WAN interface 1 RJ11 port
1.2 LAN interface 4 ethernet port, support 802.3,802.3u
1.3 Status indicators Power,System,ADSL,WLAN,LAN1~4
ELECTRICAL SPECIFICATIONS
2.1 Output voltage 12VDC, 1.0A
2.2 Power consumption 10W
ENVIRONMENT SPECIFICATIONS
3.1 Operating temperature 0°C~40°C
3.2 Storage temperature -40°C~70°C
3.3 Relative humidity 10% ~ 90%, non condensation
ADSL SPECIFICATIONS
4.1 Modulation
T1.143 I2,G. 992.1 (G.dmt),G.992.2 (G.lite),G.992.3(G.dmt.bis),
G.992.5. Support Annex A/B/C/L
4.2 Data velocity
Max downstream velocity 24Mbps(with ADSL2+ enabled), Max
upstream velocity 1Mbps
4.3 Transfering distance Max 6 kilometers
4.4 Negociation process
for speed, bandwidth and latency, sinchronicity and ADSL
activation based on ITU-T G.994.1 (G.hs)
4.5 Interoperability
Interoperability with DSLAM equipment that uses G. 992.1
(G.DMT), G.992.2 (G.Lite), G.992.3(G.dmt.bis), G.992.5 and
G.994.1(G.hs)
ATM SPECIFICATIONS
5.1.1 ATM Forum UNI 3.1
5.1.2 ATM Adaptation Layer Type 5-AAL5
5.1.3 ATM Adaptation Layer Type 0-AAL0
5.1.4
Protocolos ATM
Multiprotocol encapsulation over ATM (RFC 1483)
(bridge&router modes)
5.2.1 Unspecified Bit Rate (UBR)
5.2.2 Constant Bit Rate (CBR)
5.2.3 Variable Bit Rate with real time(VBR-rt)
5.2.4
Service Clases of ATM
Variable Bit Rate without real time(VBR-nrt)
5.3 Virtual Circuits 8PVC
Switching SPECIFICATIONS