Toshiba Network Device OIS120 - Manual (Page 5)

5
Programming
OIS operation is based on screens and tasks. Screens are created with objects on the screen.
Tasks are assigned to the objects. The maximum limit to the number of screens that can be
created is 65,534 (based on available memory). Up to 256 alarms can be defined. Recipes can be
block transferred between the OIS and connected devices (or vice versa). The following
connection modes are possible:
1 : 1 OIS connected to one device.
1 : N One OIS connected to multiple devices
N : 1 Multiple OISs connected to one device
(Requires Gateway Protocol Converter).
Before the OIS can be used a program must be loaded into it. The program is created on any MS
Windows based computer using the OISetup32 software. The OISetup32 software creates nodes,
tasks, tags and screens. Tasks and tags are then assigned to the screens and to objects on the
screens. Available tasks are:
► Go To Screen ► Call Popup ► Display Trend
► Write Value to Tag ► Add Constant to Tag ► Subtract Constant from Tag
► Copy Tag A to Tag B ► Swap Tag A & Tag B ► Copy Tag to LED
► Copy PLC Bk to Recipe Bk ► Copy Recipe Bk to PLC Bki ► Print Data
► Turn Bit ON ► Turn Bit OFF ► Toggle Bit
Notes: 1. Most new features require Ver. 3.11 or higher.
2. Ver. 3.11 requires MS Windows 2000 or higher.
TOUCHSCREENS
The setup screen with floating tools bars, text grid and touch grid (grids are adjustable)
is used to create screens with objects. Tasks are then assigned to the objects..