Therma-Stor Products Group XT150H - Manual (Page 20)

DOOR AND COLLAR ASSEMBLY
20
Door Install
Insert tab on the bottom of the door,
in between the foam installation and
the metal side.
Push down on the plastic door latch
and swing door shut. Once the door is
shut release the door latch.
Collar Install
Remove the 2 round ducts, 3 seals and small bag
of mounting hardware from inside the rectangle
opening.
Adhere seals onto the back of each duct and
mount the ducts to the front of the dehumidifier
using screws provided.
Collars and hardware
are located here.
Ultra-Aire XT150H Installer’s & Owner’s Manual