Topcom Skyr@cer 544 - Manual (Page 12)

12 Skyr@cer Access Point 544
ENGLISH
3.1.4. ADVANCED SETTING
This page contains configurations for advanced users, which the change will reflect the wireless
performance and operating modes.
AP Mode :
Select one of the AP operating modes for different application of Access Point.
1.
AP – The normal Access Point operating mode which forms a wireless ESS network with its
wireless clients.
2. AP Client – Acts as an Ethernet-to-Wireless Bridge, which allows a LAN or a single computer
station to join a wireless ESS network through it.
3. Wireless Bridge – A pair of APs operating under Bridge mode to act as the bridge that
connects two Ethernet networks or Ethernet enabled clients together. The “Remote Bridge
MAC” is where you enter the MAC address of the other AP that you connect to setup the
wireless bridge.
4. Multiple Bridge – A group of APs which consists of two or more APs operating under Multiple
Bridge mode, that can connect two or more Ethernet networks or Ethernet enabled clients
together. The way that multiple bridge setup is based on the topology of Ad-Hoc mode.
Beacon Interval : To set the period of time in milliseconds that AP sends out a beacon. Default is
100 milliseconds.
RTS Threashold : To set the size of RTS/CTS packet size. Default is 2432 bytes.
Fragmentation Threashold : To set the the number of bytes used for the fragmentation boundary
for directed messages. Default is 2436 bytes.
DTIM Interval : This value indicates the interval of the Delivery Traffic Indication Message (DTIM).
A DTIM field is a countdown field informing clients of the next window for listening to broadcast
and multicast messages. When the Access Point has buffered broadcast or multicast messages
for associated clients, it sends the next DTIM with a DTIM Interval value. Access Point Clients
hear the beacons and awaken to receive the broadcast and multicast messages.
[email protected] Page 12 Wednesday, February 12, 2003 3:19 PM