Toshiba PCX1100U - Manual (Page 6)

4
Check Ventilation - Slots and openings in the enclosure are provided for
ventilation to ensure reliable operation of the product and to protect it from
overheating. Do not block or cover these openings. Never block these openings by
placing the product on a bed, sofa, rug, or other similar surface. Never place this
product near or over a radiator or heat register, or any other heat source (including
amplifiers). Do not place this product in a built-in installation, such as a bookcase
or equipment rack, unless you provide proper ventilation.
Do Not Use Accessories - Do not use attachments, unless they are
recommended by Toshiba, as they may cause electrical or fire hazards.
Use the Recommended AC Adapter - You must use the Adaptor that comes with
your Toshiba Cable Modem.
Do Not Use Near Water - Do not use this product near water - for example, near a
bath tub, sink or laundry tub, in a wet basement or near a swimming pool, and the
like.
Do Not Place Near High Temperature Source - for example near a steamer,
Kitchen range fire, and the like.
Use Caution in Mounting This Product - Do not place this product on an
unstable surface or support. The product may fall, causing serious injury to a child
or adult, as well as serious damage to the product.
Use Care in Moving Product-and-Cart Combinations - Quick stops, excessive,
force and uneven surfaces may cause the product-and-cart combination to
overturn.
Ground the Cable System - Be sure that the outside cable system is grounded,
so as to provide some protection against voltage surges and built-up static
charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984 (Section 54 of
the Canadian Electrical Code, Part 1) provides information with respect to proper
grounding of the cable system.
Do not disconnect RF cable from your Cable Modem while the power to your
modem is on.