Tyco 1529L User Manual
Page 40
Installing the USB Touch Driver
Installing the USB Touch Driver for Windows XP, Windows 2000,
Me and 98
1
Insert the Elo CD-ROM in your computer’s CD-ROM drive.
If Windows XP, Windows 2000,Windows 98, or Windows Me starts the Add New
Hardware Wizard:
2
Choose Next. Select “Search for the best driver for your device (Recommended)” and
choose Next.
3
When a list of search locations is displayed, place a checkmark on “Specify a
location” and use Browse to select the \EloUSB directory on the Elo CD-ROM.
4
Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected,
choose Next again.
5
You will see several files being copied. Insert your Windows 98 CD if prompted.
Choose Finish.
If Windows XP, Windows 2000,Windows 98, or Windows Me does not start the Add
New Hardware Wizard:
NOTE:
For Windows XP and Windows 2000 you must have administrator access
rights to install the driver.
1
Insert the Elo CD-ROM in your computer’s CD-ROM drive. If the AutoStart feature
for your CD-ROM drive is active, the system automatically detects the CD and starts
the setup program.
2
Follow the directions on the screen to complete the driver setup for your
version of Windows. If the AutoStart feature is not active:
1
Click Start > Run.
2
Click the Browse button to locate the EloCd.exe program on the CD-ROM.
3
Click Open, then OK to run EloCd.exe.
4
Follow the directions on the screen to complete the driver setup for your
version of Windows.
2-34 Elo Touchmonitor User Guide