Ppm viewer, 6 ppm viewer – Toshiba Rockbox F Series User Manual
Page 114
Chapter 10.
Plugins
114
Main Menu
Display Options Opens ”Display Options” submenu - see below.
Start Menu (default: on) Enable/disable the start menu.
Clear all resumes: x Discard all x resume points.
Quit mpegplayer Exit the plugin.
Display Options Menu
Dithering (default: off) Prevent banding effects in gradients by blending of colours.
(only available on Sansa e200, Sansa c200 and Gigabeat F/X)
Show FPS (default: off) This option displays (once a second - if your video is full-
screen this means it will get overwritten by the video and appear to flash once
per second) the average number of frames decoded per second, the total number
of frames skipped (see the Skip Frames option), the current time (in 100Hz ticks)
and the time the current frame is due to be displayed.
Limit FPS (default: on) With this option disabled, mpegplayer will display the video
as fast as it can. Useful for benchmarking.
Skip frames (default: on) This option causes mpegplayer to attempt to maintain real-
time playback by skipping the display of frames - but these frames are still decoded.
Disabling this option can cause loss of A/V sync.
See this page in the Rockbox wiki for information on how to encode your videos to
the supported format.
10.3.6 PPM viewer
Open a PPM file in the File Browser to view it.
ppmviewer exits when any button is pressed.
Note: Both ASCII PPM (P3) and raw PPM (P6) files are supported.
b
For more information about PPM files, see
The Rockbox manual
Toshiba Gigabeat F Series