Tannoy iw6 DS - Manual (Page 2)

Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473 E: [email protected]
E: [email protected]
E: [email protected]
E: [email protected]
iw6 DS
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW6DC data file issue:1.06 // 15.01.08
TECHNICAL SPECIFICATIONS
Frequency Response (-3dB) (1) 80Hz - 51kHz
Frequency Range (-10dB) (1) 44Hz - 54kHz
System Sensitivity (1W @1m) (2) 89dB (1W - 2.83V for 8 Ohms)
Nominal Coverage Angle 120 degrees
Coverage Angle (1kHz to 6kHz) 130 degree
Directivity Factor (Q) 3.15 averaged 1kHz to 6kHz
Directivity Index (DI) 4.9 averaged 1kHz to 6kHz
Rated Maximum SPL (3)
Average 108dB
Average 107dB (with optional THP60 transformer)
Peak 114dB
Power Handling
Average 75W
Programmed 150W
Peak 300W
Recommended Amplifier Power 150W @ 8 Ohms
Nominal Impedance 8 Ohms
Distortion
10% Full Power (5.5V) 2nd Harmonic 3rd Harmonic
250Hz 1.17% 0.10%
1kHz 1.26% 0.24%
10kHz 0.3% 0.23%
1% Full Power (1.73V) 2nd Harmonic 3rd Harmonic
250Hz 0.36% 0.21%
1kHz 0.01% 0.19%
10kHz 0.08% 0.05%
Crossover Passive 2.7kHz
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
Low Frequency 1 x 165mm (6.50”) bass driver
High Frequency 19mm (0.75”) titanium dome with neodymium
magnet system
Physical
Enclosure Baffle UL 94V-0 rated ABS
Grille Steel, with weather resistant coating
Optional accessory: Backcan Zinc plated steel
Clamping Design Self aligning six way security toggle clamp
Connectors Gold plated connector spring terminals
Hole Cutout Size 271.5 x 168.5mm (10.70 x 6.63”)
Maximum wall thickness - 25mm (1.00”)
Dimensions
Front Baffle 320 x 209mm (12.60 x 8.25”) (H x W)
Front of baffle to rear 98mm (3.86”)
of magnet assembly
Front of wall to rear 93mm (3.66”)
of magnet assembly
Net Weight 2.8kg (6.16lbs)
Included Accessories Painted mask, cutout template, grille
Optional Accessories Steel back can
Steel back can with THP60 Transformer
Plaster (mud) ring
Transformer Taps (optional)
70V 60W / 30W / 15W / 7.5W / OFF & Low Impedence operation
100V 60W / 30W / 15W / OFF & Low Impedence operation
System iw6 DS Transducers
8000 3750 iw6 DC White 1
PART NUMBER PACKED QUANTITY COLOUR MODEL NAME
Ordering Information