Technicolor - Thomson 29df55n - Manual (Page 10)

Press the green key.
The PICTURE menu is displayed :
PICTURE is selected.
If this is not the case, select the Contents line using the
green key and Picture with the key.
Select the Brightness line (green key).
Adjust the brightness.
Repeat the same procedure to select and adjust the Colour,
and Contrast.
The TINT line only appears if the source is
NTSC from an AV1, AV2 or
AV3 audio-visual programme.
Select the Digital Mastering line (green key).
Select the option required.
When changing channels, Digital Mastering automatically
returns to On.
This process suppresses flicker from the TV image. In
addition, Digital Mastering improves image quality with a
further reduction of the trembling effect. The images are
more stable, sharper and less straining to the eyes. Finally,
image noise is reduced automatically according to reception
quality (INR system : Intelligent Noise Reduction).
29 DH 55 N / 29 DF 55 N
You use this function to :
•
inlay in one of the corners of the screen (P I P) :
– images from the input connectors (AV1, AV2, AV3 or RGB),
while viewing a channel ;
– or one of the channels, while viewing a programme from one
of the audiovisual input connectors (AV).
•
inlay on the screen in groups of 9, all the channels in memory
(Channel guide).
Press the green button once or several times to select
the Contents line.
Select P I P.
The PIP menu appears.
television set
picture adjustments
10
PIP (Picture-in-picture)
PICTURE
Brightness
Colour
Contrast
Digital Mastering Off On
PICTURE PIP FORMAT
Digital Mastering
Gives you several possibilities
for programmes inlays.
PICTURE PIP FORMAT
PIP Off 0n
Source (-) 03 (+)
Channel Guide (+)
Change Corner 1 2 3
4
Brightness
Colour
Contrast
Digital Mastering Off
On
Tint
Brightness
Colour
Contrast
Digital Mastering Off
On
PICTURE PIP FORMAT
Brightness
Colour
Contrast
Digital Mastering Off
On
PICTURE PIP FORMAT
You may adjust the picture
settings at any times.