Toshiba M10 - Manual (Page 167)

3.21 Error Code and Error Status Names 3 Tests and Diagnostics
Satellite Pro M10 Series Maintenance Manual (960-431) 3-61
3.21 Error Code and Error Status Names
Table 3-4 lists the error codes and error status names for the Diagnostic Test.
Table 3-4 Error codes and error status names (1/3)
Device name Error code Error status name
(Common) FF Data Compare Error
System 01
03
04
05
06
07
08
09
10
ROM Checksum Error
Serial ID Write Error
Not supported PS-System
Sending Error For AC-Adopter
Sending Error For 1st Battery
Sending Error For 2nd Battery
Thormistor error (1)
Thormistor error (2)
Thormistor error (3)
Memory 01
02
0D
RAM Parity Error
Protected Mode Not Changed
Cache Memory Error
USB EE
FE
FD
F0
F1
F2
F3
F4
F5
F6
F7
F8
F9
FA
EF
ED
USB-NO DESCR. ERROR
USB-GET DESCR. ERROR (FIRST)
USB-SET ADDRESS ERROR
HUB-GET DESCR. ERROR (Top 8B)
HUB-GET DESCR. ERROR (Whole)
HUB-SET CONFIGURATION ERROR
HUB-GET DESCR. ERROR (DESCR.)
HUB-SET FEATURE ERROR (P ON)
HUB-GET STATUS ERROR
HUB-SET FEATURE ERROR (RESET)
HUB-CLEAR FEATURE ERROR
HUB-CLEAR FEATURE1 ERROR
HUB-SET FEATURE ERROR (Eanab.)
HUB-CLEAR FEATURE2 ERROR
USB-OVER COUNT ERROR
USB-GET DESCR. ERROR (SECOND)