TurboChef Technologies C3/CMulti - Manual (Page 20)

TurboChef Technologies, Inc. C Series
3-4
Programing
Edit Mode
Edit mode enables the operator to alter
Recipes and the Cook Chamber
Temperature (CC). To Access Edit Mode,
press the “Up” and “Down” Arrows Keys on
the keypad simultaneously. When
prompted, enter the Access Code “9” and
then press “Enter”.
Changing the Cook Chamber
Temperature
The first screen in Edit Mode allows you to
change the Cook Chamber Temperature
(CC) by pressing the “Up” and “Down” Arrow
Keys. The operator may adjust the
temperature between 350
o
F and 525
o
F in
25
o
F increments. Once you have selected
the desired temperature, press the “Enter”
Key to set CC.
Altering a Recipe
The C3 oven control has 64 unique Recipes
available for the operator. The Display will
show 1 page of 8 Recipe Groups. Each
Recipe Group contains 8 Subgroups or
Recipes. See Figures 3-1 and 3-2.
To alter a Recipe, enter Edit Mode as
described above. After you have entered
the Access Code and set CC, the screen will
display the 1
st
set of 8 Recipe Groups.
Now select the Recipe Group that contains
the individual Recipe you wish to alter.
Next, select which Recipe you wish to alter
by pressing the Soft-Key corresponding to
the Recipe Item. See Figure 3-2.
Figure 3-2: Edit Groups
Group A
1 st ITEM 5 TH ITEM
2 nd ITEM 6 TH ITEM
3 RD ITEM 7 TH ITEM
4 TH ITEM 8 TH ITEM
Figure 3-1: Edit Groups
EDIT GROUPS
GROUP A GROUP E
GROUP B GROUP F
GROUP C GROUP G
GROUP D GROUP G