Teac CD-P650 - Manual (Page 14)

14
1 Press the CD/USB button to select “USB.”
2 Connect your iPod using the USB cable supplied with the
iPod.
The iPod automatically turns on and starts playback from the iPod
music list.
< If the display mode is set to “Extended mode” (see page 22),
playback don’t start automatically.
When the iPod is connected while CD-P650 is set to another
source, the iPod will turn on and enter the pause mode.
< The iPod battery will be fully recharged when the iPod is docked
and CD-P650 is turned on.
< While the iPod is connected to CD-P650, the headphones jack of
the iPod can not output the sound.
If you want to listen to the sound from your headphones, connect
your headphones to CD-P650’s PHONES jack.
Listening to an iPod Playback
CD USB
Playback from selected track/file
1 Press the Skip/search buttons ( .m/,/) to select a
track/file, or use the numeric buttons to input the track/file
number.
For example, to select track/file number 25, press “2” first then “5”.
To select numbers less than 10, press “0” and then the number. As
an example, to select number 5, press “0” then “5”. (Optionally, you
may press just the number “5” and wait for a few seconds.)
2 Press the Play button ( y) .
Playback starts from the selected track/file.