Before first use, How to use – Toastess Stainless Steel Electronic Slice TT718 User Manual

Page 4

Advertising
background image

BEFORE FIRST USE

1. Remove all packaging.

2. Read all instructions carefully and keep them for future reference.

3. Make sure that the Crumb Trays are in place.

4. Plug the power cord into a 120 V AC wall outlet. Operate both sides of the

toaster once or twice without bread on the highest browning level to burn
off any residue left from the manufacturing process. Any smoke or smells
produced during this procedure are normal.

HOW TO USE

Reheat Function:

Reheats previously toasted bread, bagels, etc. without
further browning

Defrost Function: First defrosts frozen bread then toasts

Cancel Function:

Interrupts the toasting cycle

1. Plug power cord into a 120V AC wall outlet.

2. Select the degree of browning on the Browning Control Knob.

Light – setting 1 or 2

Medium – setting 3, 4 or 5

Dark – setting 6 or 7

3.

NOTE: If the toaster is not plugged in, the carriage control lever will not lock.

Toasting

1. Place slices of bread, bagels, English muffins etc. into the bread slots.

The bread guides will adjust automatically to hold thinner slices.

2. Select the desired setting on the Browning Control Knob.

3. Push the Carriage Control Lever down until it locks. The Cancel light will

come on. If you wish to raise the Carriage Control Lever before the end of
the toasting cycle, press the Cancel button.

4. When the toasting cycle is complete, the Carriage Control Lever will pop-up

automatically.

4

Booklet_TT718_ENG:Salton Booklet 4/29/11 11:22 AM Page 4

Advertising