Telex AUDIOCOM BP-2000 - Manual (Page 7)

Latched Mode:
Tap the button once to talk. The indicator will glow
green. Tap the button again when finished with a
conversation.
Momentary Mode:
Press and hold the button to talk momentarily. Release
the button when finished talking.
NOTE: On the BP-2000, if no headset is connected
when the
Talk button is pressed, the Talk button will
have the same function as the Chan button.
5. Sidetone Control
When using a headset, this control adjusts your own voice
level heard in the headphones. To adjust the level, tap
the
Talk button once to turn on the headset microphone.
Then, use a small flat-blade screwdriver to increase or
decrease your voice level while talking into the
microphone. (This control is accessable by removing one
screw of belt clip.)
6. Headset Connector
This connector accepts a four-wire Telex® boom-
microphone headset.
7. Intercom Channel Connectors
On the BP-2000, intercom channels are connected via a
pair of 6-pin connectors (one male and one female). The
male and female connectors are wired together in parallel,
providing a “loop through” at each connector pin. Use
one connector to connect to the intercom channel. Use
the other connector to “daisy chain” a cable to the next
belt pack or other station on the channel.
6