Thecus Technology N8800 - Manual (Page 55)

AD Domain Example
Item Information
Work Group / Domain
Name
domain
ADS Support Enable
ADS Server Name Computer1
ADS/NT Realm
Domain.local
Administrator ID Administrator
Administrator
Password
***********
Confirm Password ***********
55
System Settings
NOTE • The DNS server specified in the WAN configuration page should be
able to correctly resolve the ADS server name.
• The time zone setting between N8800 and ADS should be identical.
• The system time difference between N8800 and ADS should be less
than five minutes.
• The Administrator Password field is for the password of ADS (Active
Directory Server) not N8800.
The System menu gives you a wealth of settings that you can use to configure
your N8800’s system administration functions. You can set up system
notifications, view system logs, and even upgrade firmware from this menu.
System Notifications
From the System menu, choose the
Notification item, and the Notification
Configuration screen appears. This screen
lets you have the N8800 notify you in case
of any system malfunction. Press Apply to
confirm all settings. See following table for
a detailed description of each item.
Consult with your mail server
administrator for email server
information.
NOTE
Notification Configuration
Item Description
Beep Notification
Enable or disable the system beeper that beeps when a problem
occurs.
Email Notification Enable or disable email notifications of system problems.
SMTP Server Specifies the hostname/IP address of the SMTP server.
Port Specifies the port to send outgoing notification emails.
Auth Type Select the SMTP Server account authentication type.
SMTP Account ID Set the SMTP Server Email account ID.
Account Password Enter a new password.
Confirm Account
Password Confirm a new password.
Receiver’s E-mail
Address Add one or more recipient’s email addresses to receive email
notifications.
Test E-Mail Click to send out a test e-mail to make sure the settings are
correct.