Technika DAB121 - Manual (Page 8)

6
DAB SCANNING
When first used, your radio scanned the DAB band for
available stations. The station services found were then
stored in your radio’s memory.
You can re-scan the band at any time if you move to a different
area or just to refresh the stored list of available stations.
NOTE: On some occasions, when moving to a different area,
re-scanning may not fully update the station list. In this case
it may be necessary to reset your radio. (see the ‘Factory reset’
option on page 8).
To scan for DAB stations manually:
Select the DAB band. •
Press the • SCAN button.
The scanning process will take a few minutes. The number of
services found during the scan will be shown at the right side
of the display.
After the scan, the radio will re-tune to the last station playing
if it is available. Alternatively, you can continue to browse for
another station as described on the previous page.
Scanning... 34
Progress
bar
Number of
stations found
DAB & FM STATION PRESETS
DAB and FM presets
Your radio can store up to 10 of your favourite stations as
presets on both the DAB and FM bands for quick recall.
To store a preset 1-10
Tune to the station you want to store as a preset. •
Press and • hold the PRESET button.
‘Preset Store’ will be displayed.
Press the • P or O button repeatedly to find the preset
number you want to store.
For each preset number the preset station currently stored will
be displayed or ‘(Empty)’ if none is stored.
Press the • VOLUME/SELECT control to confirm if you want
to store the station in the displayed preset number.
To recall any preset 1-10
Press the • PRESET button briefly.
Press the • P or O button repeatedly to find the preset
number you want to play.
Press the
• VOLUME/SELECT control briefly to play the
preset.
The radio will re-tune and the preset number will be displayed.