Targus 400-0170-001A - Manual (Page 7)

7
Targus Wireless Multimedia Presenter
2 Select Search for the best driver for your device.
(Recommended) and then click Next.
The wizard searches for the appropriate device driver.
3 Click Next, then Finish to complete the driver
installation.
Windows
®
2000/XP Operating Systems
The Found New Hardware Wizard appears.
If it does not, the operating system has installed the
default driver automatically. No other steps are
necessary.
1 Click Next.
The wizard searches for the appropriate device driver.
2 Click Next, then Finish to complete the driver
installation.
Establishing a Communications
Link
After your computer detects the USB receiver and the
driver software is installed, you must establish a
communications link between the presenter and its receiver
BEFORE you can use the presenter.
Make sure that your computer is turned on and has
detected the USB receiver before you establish a
communications link.
The light emitter diode (LED) illuminates to indicate your
computer has detected the receiver.