Telex AUDIOCOM MS-2002 User Manual
Page 16
Advertising
16
A good configuration for smaller intercom systems when you want to operate the MS-2002 as a master speaker station, with a
separate speaker for each intercom channel. Make sure the MS-2002 intercom DIP switches are set for binaural speaker
operation on page 12. Also, set the Combine/Isolate switch to the Isolate position. With this setting, the two (2) intercom
channels are completely separated. The internal amplified speaker is used as the speaker output for channel 1, and the
SPK-2000 is used for channel 2.
FIGURE 4.
MS-2002 Binaural Master Speaker Station Configuration.
Advertising