Topcom BPM Wrist 7500 - Manual (Page 8)

8
TOPCOM BPM Wrist 7500
9.3 3D Wrist position system
Keeping the wrist at your heart level while measuring is extremely important to get
accurate blood pressure values.
This monitor features a Wrist Position Sensor which guides you to adjust your posture
by the WRIST POSITION INDICATOR symbols shown on screen and helps to determine
your optimal height of the wrist for measurement.
Wrist position indicator function in measurement
To switch the 3d positioning on or off:
After setting your personal blood pressure levels:
• Press the MODE button, the ‘3d On’ is displayed.
• Press the UP or DOWN button to set the function on of off.
• Press the MODE button to confirm.
• The monitor is ready to be used.
10 Applying the cuff
1. Remove all watches, jewelry, etc. prior to attaching the
wrist monitor. Clothing sleeves should be rolled up and
the cuff should be wrapped on bare skin for correct
measurements. Apply cuff to left wrist with palm facing up.
2. Make sure the edge of the cuff is about 1 cm from the
palm. In order to insure accurate-measurements.
3. Fasten the velcro strap securely around your wrist so
there is no extra space between the cuff and the wrist. If
the cuff is not wrapped tight enough ,the measurement
values will be false.
4. If your physician has diagnosed you with poor circulation
on your left arm, place the cuff around your right wrist.
Move wrist upwards Move wrist down-
wards
Rotate wrist counter-
clockwise Rotate wrist clock-
wise
1cm
MODE
ST AR T STO P
MEMOR Y