Technika SP114 - Manual (Page 8)

6
iPod ADAPTORS FINDING AN ADAPTOR
Before docking your iPod you must first check if your iPod has
a docking connector. Early iPod models and iPod shuffle do
not have one and cannot be docked to your unit. The docking
connector is located on the base of the iPod as shown below. iPhone adaptors
Two adaptors are supplied with your docking station. One
adaptor is compatible with iPhone 1st generation, the other
with iPhone 2nd/3rd generation. These may be used if you
are docking an iPhone.
iPod adaptors
If you are docking an iPod, the iPod may have been supplied
with a standard dock adaptor in the packaging when new.
If you don’t have a dock adaptor
If your iPod was not supplied with a standard dock adaptor,
or if you have lost the adaptor, you can buy one from Apple
on-line. To determine the exact model of your iPod, refer to
this web-link - http://support.apple.com/kb/HT1353. You
can then browse the iPod accessories page on the Apple
website to find an adaptor for your iPod model that can be
purchased on-line.
Docking Connector
iPod adaptor
Docking bay
Before docking your iPod, you must first fit the correct iPod
adaptor to the docking bay. Each iPod adaptor matches the
shape of a particular iPod and is necessary to ensure that
your iPod is securely held when docked.
DOCKING AN iPod
DOCKING YOUR iPod
To dock your iPod:
Check that the correct iPod adaptor is fitted to the •
docking bay.
Locate the iPod on the Docking Connector and press it
•
gently home.
To remove your iPod from the dock:
Grip the iPod at the sides. •
Lift the iPod gently from the dock. •
CHARGING AN iPod
When an iPod is docked, the iPod will begin to charge
automatically.
NOTE:- The iPod will charge at all times that the unit is
connected to mains power.
FITTING THE iPod ADAPTOR
Fit the adaptor by pressing it gently into the Docking Bay as
shown above.
NOTE: Do not dock an iPod without fitting the correct adaptor,
you may damage the iPod and your unit.