Telex 2.1 Multimedia Speaker System - Manual (Page 2)

Setup and Configuration
1. Connections:
Note: Be sure that all power switches (subwoofer and speaker) are in the off position
before connecting and configuring system.
a. Connect the subwoofer to the right
speaker (red plug)
b. Connect the subwoofer to the left
speaker (white plug)
c. Connect the subwoofer to the PC, using
the supplied connector cable
i. Green plug to soundcard (green
speaker jack)
ii. Red plug to right speaker
iii. White plug to left line input
d. Connect the subwoofer control cable
(Black DIN) to the right speaker
e. Connect the AC power cord on the
subwoofer to a wall outlet.
2. User controls:
a. Speaker power on/off, volume control. Turn the control clockwise to
increase volume, counterclockwise to reduce volume. To turn the
speakers off, turn the control counterclockwise until you feel a click.
The green power indicator light will shut off when the speakers are
turned off.
b. Speaker tone control. Turn the control clockwise to increase the
treble response. Turn the control counterclockwise to increase bass
response.
c. Subwoofer power on/off, volume control. Turn the control
clockwise to increase volume, counterclockwise to reduce volume.
Red plug from PC
White plug from PC
Red plug to right speaker
White plug to left speaker
Black DIN cable to right speaker