Transcend Information T.SONIC 320 - Manual (Page 10)

Basic Operation︱
The MP320 needs to be charged for at least 12 hours before first use.
Charging the Battery
Remove the MP320’s cap and plug its USB connector directly into an available USB port on your desktop or
notebook computer. The MP320’s internal Li-ion battery will begin charging.
Figure 3. Connecting to a Computer
Power ON
Press and hold the button to turn on the player. An animated Transcend logo will appear on the screen.
After the startup screen disappears, the Main Menu will appear. You can now start using the MP320. The Main
Menu will appear.
• It takes a few seconds for the MP320 to power up.
• If the Lock icon appears on the display while powering on the MP320, this means that the
switch is enabled. You must switch off the Hold mode before you can power on the player.
Power OFF
Press and hold the button to turn off the MP320.
• It takes a few seconds to completely power down.
• The power OFF animation will be displayed:
10