Tannoy CMS801 DC - Manual (Page 6)

CMS801 DC
DIMENSIONAL SKETCHES
The PI back can accepts direct
connection to installed conduit in two
ways using squeeze connectors:
Any of the three knock-out points at the
side 19mm / 22mm / 28mm
(0.75" / 0.87" / 1.10")
1
2
CMS801 PI BACK CAN
22mm (0.87") via the clamp location at
the rear after first removing cable clamp
TEMPLATE HOLE CUTOUT SIZE - 295mm (11.61 )
27.00
[1.06"]
15.00
[0.59"]
16.00 [0.63"]
4.50 [0.18"]
522.00 [20.55"]
81.00
[3.19"]
360.00 [14.17"]
15.00 [0.59"]
635.00 [25.00"]
15.00 [0.59"]
25 POSITIONS
SUPPLIED ACCESSORIES
C-RING
TILE BRIDGE
OPTIONAL ACCESSORIES
PLASTER (MUD) RING
CMS801 DC data file // issue 1.07// 15.07.08
10.00
[0.39"]
293.00 [11.54"]
70.00
[2.76"]
180.00 [7.09"]
205.00 [8.07"]
230.00 [9.06"]
255.00 [10.04"]
280.00 [11.02"]
305.00 [12.01"]
650.00 [25.59"]
366.00 [14.41"]
397.0
[15.63"]
291.4
[11.47"] 365.0
[14.37"]
8.8
[0.35"]
151.2
[5.95"]
168.5
[6.63"]
293.00
[11.54"]
366.00
[14.41"]
80.00
[3.15"]
192.00 [7.56"] 192.00 [7.56"]
Ordering Information
Part number
8001 4550
8001 4560
8001 4650
8001 4570
7600 1658 Model name
CMS801 DC BM
CMS801 DC PI
CMS801 Plaster (Mud) Ring
CMS801 PI 8ohm Back Can
CMS801 DC 60W transformer kit 8 ohm Baffle / Grille Colour
White / paintable
White / paintable
Zinc plated steel
Zinc plated steel
N/A
Packed Quantity
2
2
10
1
1
Tannoy adopts a policy of continuous improvement and product specification is subject to change.
[email protected]