Toshiba 32ZT29B - Manual (Page 6)

6
To conserve energy it is best to turn your TV off, although remember to leave it in Standby if the timer has
been set to record a digital broadcast.
Connecting and turning on
your new TV
The TV back connections…
SETTING UP
IN
OUT
the back of your TV
video recorder
SAT IN/OUT
SCART 1 SCART 2
SCART 3
Before connecting any external equipment always make sure
that the power is OFF.
CONNECT THE AERIAL TO THE SOCKET ON THE BACK
OF THE TELEVISION.
When connecting your video recorder you must use a full
21-pin SCART lead AND an aerial cable.
Before running Auto Tune put your video recorder to
Standby.
The AERIAL must go into the socket marked on
the back of the TV.
AERIAL CABLE from the TV socket (marked VCR) to
AERIAL IN on back of the VCR.
SCART LEAD from Scart 2 on the back of the TV to
the IN/OUT SCART socket on the back of the VCR.
Without this, you will not be able to view videos or
record digital programmes.
1
1
2
3
2
If you connect the VCR to either
Scart 1 or 3 on the back of the TV
, the
VCR will not respond
to any timer events.
!
3
If you use your television to display completely still images,
or moving pictures which have a permanent still image superimposed i.e. broadcast network logos,
it is always advisable to reduce BOTH the brightness and contrast settings.