Technicolor - Thomson TU-HDT104A - Manual (Page 23)

Operating Instruction Book
TU-HDT104A
23
Install
When the receiver is initially set up,
conduct a channel search by selecting the
“Auto scan channels” function.
z Auto Scan channels
Auto Scan channels provides
the easiest way to conduct a
channel search. It does not
require you to enter any other
information. This function is
strongly recommended for regular
users. However, the user should
be aware that all existing
channels will be removed as soon
as you confirm start of auto scan.
In the Auto Scan channels OSD,
all channels found will be listed.
The channel search may take a
few minutes. If you abort an auto
scan during the scan process,
some channels may not be
available to you.
z Manual Channel Search
In the “Manual channel search” window you can set the specific channel to
search. Press the left or right button then OK to select the physical channel
you wish to search.
Restore shipping condition
If you wish to reset all previous settings, you can use this feature to do so. Once you
decide to restore shipping settings, all previous settings will be lost. Please be very
careful before you confirm this action.
Select Region
Using
W/X you may select your local region: New South Wales, Victoria, Queensland,
South Australia, Western Australia, Tasmania, Northern Territory. This setting will
allow the digital receiver to display the current time in the I-Plate or when the receiver
is in Stand-By mode.