Topcom BUTLER 2562 User Manual
Page 21
BUTLER 2562
21
ENGLISH
4.9. FLASH TIME DURATION
1.
Enter the menu by pressing
/OK
2.
Select Setup using the
and
keys
3.
Press OK
4.
Select RECALL using the
and
keys
5.
Choose RECALL 1 for short flash time (100ms) or RECALL 2 for long flash time (250ms)
4.10. AUTOMATIC ANSWER
When there is a incoming call and the handset in on the base, the phone automatically takes the line when lifted. This is
the default setting, but can be set OFF:
1
Enter the menu by pressing
/OK
2
Select HANDSET MENU using the
and
keys
3
Press OK
4
Select Auto ansWER using the
and
keys
5
Select ON (for automatic answer) or OFF
6
Press OK
4.11 RESET
It is possible to return the phone to the original default configuration. This is the configuration which was installed when
you first received the telephone.
To return to default settings:
1.
Enter the menu by pressing
/OK
2.
Select Setup using the
and
keys
3.
Press OK
4.
Select DEFAULT using the
and
keys
5.
Press OK
6.
Enter the 4 digit PIN code (default =0000)
7.
Press OK to validate
WARNING! Returning to default settings will delete all entries in the phonebook and call log.
The PIN code will also be reset to 0000
HL_B2562_scan.book Page 21 Monday, December 29, 2003 12:15 PM