TDK Belleta iPB Series - Manual

©2001 Innoveta TM Technologies, Inc. 1/2 10/19/2001
Revision 2
Product Brief: Belleta® iPB Series – Surface Mount PicoBrick
©2003-2005 TDK Innoveta Inc.
iPBProductBrief060805.doc 6/8/2005 ℡ (877) 498-0099
1/2
Base Product Code Input
Voltage
Output
Voltage
Output
Current
Efficiency
iPB48007A050V 36-75V 5V 7A 89%
iPB48010A033V 36-75V 3.3V 10A 88%
iPB48010A025V 36-75V 2.5V 10A 84%
iPB48010A018V 36-75V 1.8V 10A 80%
iPB48010A015V 36-75V 1.5V 10A 78%
Input Characteristics
Operating input range 36-75V
Transient input voltage 100V 100mS max
Turn-on voltage 33V
Turn-off voltage 31.5V
Start-up time 110 mS On/Off to 90% Vout
Maximum input current 2A Input 0-75V, Io,max
Output
Characteristics
Output voltage tolerance
3.3V and below
5V
+/- 3.3% max
+/- 4% max
Over line, load, and temp
to end of life
Efficiency see product table Io,max
Line regulation 2 mV Over rated input
Load regulation 5 mV Over rated load
Output voltage adjustment 90%-110% %Vo,nom
Output ripple 45 mVp-p 20MHz bandwidth
Dynamic response
Transient voltage
Recovery time
190 mV
50 uS
Load step 25% of Io,max
slew rate =0.1A/us
Ripple frequency 400 kHz Fixed
Protection
Current limit inception 150% of Io,rated
Short circuit Io,rated Auto-recovery hiccup
Output overvoltage 125% of Vout,nom Auto-recovery hiccup
Environmental
Operating temperature -40C to 110C Measurement point in full
datasheet
The Belleta Series offers a 35W PicoBrick power module in the
industry’s smallest 10A footprint that is 33% smaller than an
industry standard eighth brick and power pin compatible with an
existing industry standard footprint. The Belleta Series eliminates
the need to use highly derated eighth or quarter brick power
modules, thereby optimizing board space utilization and cost. As
with other modules in the Belleta series, a low component count
results in a low cost, high performance design. The low weight,
surface mount design is well suited for almost any manufacturing
environment.
Features
• Size - 30.5mm x 29.3 mm x 8.1 mm
(1.20 in. x 1.16 in. x 0.32 in.)
• Surface mountable
• Maximum weight 18g (0.65 oz)
• Up to 35W of output power in high
ambient temperature, low airflow
environments with minimal power
derating
• Basic insulation – 1500Vdc
• Negative logic on/off
• Monotonic start-up
• Starts with pre-biased output
• Output voltage adjustment
• Constant switching frequency
• Full, auto-recovery protection:
o
Input under voltage
o
Output over voltage
o
Current limit
o
Short circuit
o
Thermal limit
• Applying for UL 60950 (US and
Canada), VDE 0805, CB scheme
(IEC950) Safety markings
• CE Mark (EN60950) pending
• Multiple patents pending
Typical Performance
Belleta® iPB Series DC/DC Power Modules
48V Input, 10A Output
Surface Mount PicoBrick