Tascam HD-R1 - Manual (Page 18)

18
TASCAM HD-R1
3–Screens and Menus
select the next character to the right. Press the
SKIP
µ key to select the next character to the left and
clear the previous character. When finished setting the
password, press the
SKIP
≤ key to select
SAVE
.
Press the
ENTER
key to confirm the password setting
and return to the Network Submenu.
Press the
CANCEL
key to cancel the password setting
and return to the Network Submenu and retain the
previous password.
IP Address
T
he
IP Address
set up is displayed.
IP Mode
DHCP
or
Static
. When set to
DHCP
, the
IP
Address
,
IP Mask
, and
Gateway
are
obtained automatically, provided that there is a DHCP
server on the LAN. When set to
Static
, they must
be set manually.
DHCP
is the default.
IP Address
When in
Static
mode, this is used to set the IP
Address. When in DHCP mode, the
IP Address
is obtained automatically, so it is simply displayed
here and cannot be modified.
IP Mask
When in
Static
mode, this is used to set the
IP Mask
. When in DHCP mode, the
IP Mask
is
obtained automatically, so it is simply displayed here
and cannot be modified.
Gateway
When in
Static
mode, this is used to set the
Gateway
. When in DHCP mode, the
Gateway
is
obtained automatically, so it is simply displayed here
and cannot be modified.
Parallel Port
This menu contains all settings relating to the parallel
port:
Parallel Mode
This option controls how tracks are triggered via the
parallel port. Options are
Off
,
Direct Play,
Binary Play,
or
Program Play
. See the
Parallel Interface section of this manual for details.
Input Polarity
Active Low
or
Active High
. Determines the
polarity of all parallel port input signals.
Busy1 Signal
If set to
Playback
, the busy signal is initiated
during playback.
If set to
Recording
, the busy signal is initiated
while recording.
If set to
Finished
, the busy signal is initiated for
100 ms when the HD-R1 has finished playing.
If set to
Ducking
, the busy signal is initiated when
the ducking feature is attenuating.
If set to
CF Door
, the busy signal is initiated when
the CF door is opened.
If set to
Media Full
, the busy signal is initiated
when the CF media has no space.
Busy1 Polarity
Normally Open
or
Normally Closed
.
Determines the state of the busy relay when it is idle.
Busy2 Signal
Same choices as
Busy1 Signal
.
Busy2 Polarity
Same choices as
Busy1 Polarity
.
Playlist Defaults Submenu
The items in the menu determine the default settings
for a new playlist entry. These settings also determine
how Direct Play and Binary Play modes will control
tracks when
Playback Mode
is set to
Single
,
All
, or
Folder
.
Trigger
Determines how the external input will control
playback for the track. The choices are
Trigger
(pressing button begins playback),
Momentary
(play only while button is held down), or
Toggle
(first button press plays, next button press stops).
Interruptible
Yes
or
No
. When
Yes
, the track’s playback will
be interrupted if another track is triggered before it
is finished. When
No
, the track will play to its end
before another track can be triggered.
Repeat Count
When triggered, the track will be repeated this many
times. The range is
Off
,
0
–
20
and
Infinite
.
Attenuation
Modifies the volume of this track at playback. The
range is -30 dB to 0 dB in 1 dB increments, the default
is 0 dB.