Tannoy TFX Powerd Subwoofer User Manual
Page 4
04_ TFX SUBWOOFER MANUAL
WARnInG:
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER
INJURY OR DAMAGE.
Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service
personnel.
Check that the voltage rating displayed on the rear panel is correct for your area before connecting. If it is incorrect,
please refer to your local dealer or authorised service agent. Use only with the detachable power cord supplied with the
apparatus, or by your local distributor or dealer.
stRonG MAGnetIc FIeLD
Due to the powerful drive unit magnet, do not place within 1 metre (3 foot) of a cathode ray tube (CRT) television or
monitor. There is no issue with plasma and LCD devices.
Fcc InFoRMAtIon (UsA onLY)
CAUTION: Any change or modification to this unit could void your authority to operate this equipment, granted by
the FCC.
This apparatus has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential
installations. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
according to these instructions, may cause harmful interference to other electronic equipment. However, there is no
guarantee that interference will not occur in all installations. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a different circuit than the receiver.
• Consult your dealer or an experienced radio/ television technician for help.
This equipment has undergone safety and EMC testing, and complies with the European Low Voltage Directive 73/23/
EEC and Electromagnetic Compatibility Directives 89/336/EEC and 2004/108/EC.
This equipment complies with the European EuP Eco-design directive, with standby mode power consumption not
exceeding 0.5W.